Rs97 B50k 8pin Potentiometer With Switch Audio Potentiometer
RP97 Series Product Specifications
| 1.Electrical Characteristics |
|
| Total Resistance |
50 KΩ (Terminal1~3) |
| Rated Voltage |
Linear taper B: AC50V,DC10V |
| Switch Rated Voltage |
0.5A at DC 12V |
| Noise |
Less than 100mV |
| Insulation |
100 MΩMax |
| Dielectric strength: |
1 minute at AC 300V |
| |
|
| 2.Mechanical Characteristics |
|
| Total ratational angle: |
300±10° |
| Switch ratational angle: |
50±10° |
| Rotational torque |
10~250gf.cm |
| Switch action |
1000gf.cm Max |
| Shaft wobble: |
0.6*L/20mm Max(L: Shaft length) |
| Push-Pull Strength of shaft |
6KG |
| Bushing nut tighten Strength |
5.0 Kgf.cm Min |
| Click torque |
50~250gf.cm |
| |
|
| 3.Endurance Characteristics |
|
| Rotational life: |
10,000cycles |
| Push-life: |
10,000 cycles |
| Operating temperature range: |
-10ºC to +70ºC |
| Storage temperature range: |
-25ºC to+80ºC |
Suggestions for order
When choosing potentiometers, please pay attention to the following items:
1.External dimensions and designation.
2.Usage.
3.Nominal resistance value and permissible deviation
4.Regular pattern ofresistance.
5.Whether soft positioning is provided.
6.Rated power or operational voltage.
7. Because of constant improvement or other reasons, the designation, external dimensions and performance index ofthe actual productsmay be difterent from that in this catalogue. For any change,please see the external figure and parameters in the Specification Table attach
ed to the sample.
Our Factory
FQA:
1.What are the advantages of your factory?
Our factory has mold manufacturing workshop, plastic injection molding workshop and lathe center. 80% of the raw materials are supplied by ourselves to ensure that the quality and delivery speed are higher than those of our peers.
2.Do you support customization?
Yes, customization is supported, we need you to provide drawings, usage and requirements.
3.What is your shipping port and the term of payment ?
Ex-work or FOB Shenzhen.
30% paid in advance, 70% balance before shipment by T/T.(First transaction requires 100% payment in advance.)
4.How long is your lead time?
It will take 3workdays for samples,7-15workdays for mass production.
5.Can I get samples from you?
Small amount of samples can be provided for free, but customers need to pay for air freight themselves.
6.What's your MOQ ?
Our MOQ is 2K. If it is a small batch order, the price needs to be increased appropriately.
Audited Supplier 
){kind=link}
){kind=link}